Specifications and Features:

Full depth cutting capacity:

(with Hitachi M12VC spindle and brygga electronics set)

• 3/4" baltic birch plywood with 1/4" bit at 120 IPM.

• 1/8" 6061 aluminum with 3/16 bit @ 10 IPM.

Specs:

• X: 49", Y: 49" or 73" or 97", max. Z height: 16":

• Accuracy: 0.005" or better.

• Repeatability: 0.001" or better.

• Footprint: 71" in width by 62" or 86" or 110" in length.

• Available in: 4' x 4' or 4' x 6' or 4' x 8' configurations.

• Available for Nema 23 or Nema 34 size stepper motors.

Nema 23 size: Rapids up to 750 IPM, feedrates up to 250 IPM.

Nema 34 size: Rapids up to 1100 IPM, feedrates up to 500 IPM.

Features:

• CenteRail embedded v-rail linear motion system with cold-drawn steel rails.

• Integrated primary belt drive system.

• Secondary rack & pinion drive system.

• Constant pinion to rack gear pressure.

• Spindle mount with 3-1/2" effective clamp height.

• Same engagement angle of stepper thrust on the carriages in either direction.

• Fully integrated electronics set with Nema 23 size steppers, 3-Amp unipolar

drivers and SuperPid spindle control available.

brygga, bryggaCNC and CenteRail are trademarks of bryggaCNC, a California company.

bryggaCNC reserves the right to make modifications or substitutions without notice. See Terms and Conditions

Designed and Manufactured in the USA

SPECS

3/4" BB Plywood

1/8" Aluminum

14" Cube

Symmetrical gear angle